How to clean the shower quickly and easily. The rules for the correct maintenance of the shower enclosure, tiles, joints and shower head. How to remove mold and limescale with natural products and remedies and which products to avoid.
Often a tiring and difficult issue to deal with that of housecleaning.
It is not difficult to find excuses to give up and postpone housework, but some circles, especially the bathroom, they need cleaning and disinfection with daily frequency.
One of the elements that we like so much to use for our daily cleaning, also needs careful maintenance: the shower.
To clean the shower becomes basic because in this way we will not go to ruin the shower cubicle and for keep away limescale and bacteria that could attack it and deteriorate it little by little.
How to clean the shower: remove limescale
There most harmful substance and more here I’m in shower cabin is without a doubt the limestone that is formed following the continuous water jets that break on the walls.
Also read: 50 cool shower stall ideas
Keeping it away as much as possible, eliminating once it has formed, will be the best possible response to these annoying attacks.
In particular, the most annoying is the limestone that forms on the glass walls, causing it to lose its original transparency.
Natural remedy
The natural remedy provides a composition that is obtained by combining:
- White vinegar
- bicarbonate
- lemon.
Then proceed as follows:
- Put the solutions in a special container with a spray,
- Spray on the surface and leave for a few minutes,
- Then rub carefully, using a cloth that is not excessively abrasive so as not to damage the material of the walls.
- Rinse and the shower box will shine again.
How to prevent limescale build-up
To avoid excessive accumulation of limescale, at the end of each shower it is recommended to dry the walls with a cloth or using a window cleaner brush that will perfectly remove every single drop.
How to clean the shower from mold
There mold it is one of the most dangerous elements for the good preservation of the shower, as well as being a health hazard.
Natural remedy
You may be interested in: Clean floor joints with ease
The steps to follow to get rid of mold are as follows:
- Prepare a solution with half a liter of water, a quarter of a liter of vinegar and a glass of lemon,
- If the mold is excessive, add some bicarbonate,
- Pass a stiff bristle toothbrush between the tile joints and where necessary,
- Rinse,
- Wipe dry with a dry cloth.
How to clean the shower head
The shower head is the fundamental point: the limestone excessive can lead tototal occlusion of the pinholes, making it difficult to wash and forcing you to change the shower head directly.
How to clean a detachable shower head
Do you want design advice on how to furnish? Join the group
If it is possible to disassemble it, create a solution of warm water and white vinegar by immersing the shower head in a bain-marie.
The longer it stays, the more effective the product will be.
How to clean a non-removable shower head
If it is not possible to disassemble it, then it will be remedied using a stratagem.
- Fill a bag with cold water and vinegar in equal portions,
- Tie it to the shower head and leave it for a couple of hours,
- Remove the bag and open the shower tap,
- Drop the limescale
- If this is not enough, gently scrape the shower head with a toothbrush,
- Additional elements can be removed with a needle, being careful not to damage the parts of the shower head.
How to clean shower tiles and grout
The shower tiles they must be sanitized often as due to the vapors it easily incurs the formation and proliferation of bacteria.
In particular, the problem mainly focuses on the joints, on which dirt accumulates, as well as soap and foam residues.
Clean the shower joints
For clean the joints from dirt and return them to their original color, just use an old toothbrush, and apply a solution of bicarbonate and hydrogen peroxide, rubbing vigorously.
Wait a few minutes before rinsing with warm water.
Clean the shower tiles
To clean the tiles, just use water and vinegar, not just for remove limescale, but also to sanitize.
While the mold stains they must be removed from the tiles with hydrogen peroxide, leaving it to act for a few hours before rinsing.
How to clean the shower curtain
If you have one curtain instead of the plastic or glass box, it must be cleaned and washed as if it were a garment, then remove the curtain from its support.
There will be two alternatives.
Machine wash the shower curtain
Place the curtain in the washing machine, carefully following the instructions on the product label.
It is advisable to do a washing identical to that for delicate garments, adding a couple of teaspoons of baking soda.
Use the trick of inserting a few towels, so that too stiff folds can damage the curtain in the corners.
Hand wash the shower curtain
If you don’t have a washing machine or you prefer the traditional method, equip yourself with a large basin.
- Fill the basin with warm water,
- Dissolve a couple of tablespoons of coarse salt,
- Immerse the tent in the basin, placing weights on it so that it does not float,
- Leave to soak for at least 2 hours,
- If there are stains left, wipe a non-abrasive sponge with baking soda,
- Allow to dry by hanging the tent in a ventilated but not exposed to the sun to avoid discoloration.
Remove mold stains from the shower curtain
If the situation is limited to having to remove some mold stains from the curtain, you can also operate without having to remove the curtain, using a natural remedy.
- Rub a slice of lemon on the parts where mold occurs,
- Leave on for at least an hour,
- Rinse thoroughly.
How to clean the marble shower
If you have chosen to make the marble walls, decidedly luxurious solution, it is necessary to use some precautions.
First of all, provide yourself with water, baking soda and some cloths.
- Remove the surface dirt from the shower with a rag,
- Prepare a solution with water and two teaspoons of baking soda,
- Put the solution in a spray bottle,
- Spray the product about 20 cm from the walls,
- Leave on for a couple of minutes,
- Rinse with a non-abrasive sponge.
If you want one more thorough cleaning of the interstices between one tile and the other, but not to be done too often so as not to damage the marble, you can use an old toothbrush with a few drops of bleach.
By passing through the affected areas, without touching the rest of the surface, even the most stubborn dirt can be perfectly removed.
How to clean the shower tray
The shower tray can be made of different materials, each of which requires special treatment.
Cleaning a stone shower tray
For a shower tray in natural stone, no special precautions are required, other than to clean and keep the shower walls in good condition regularly, in order to prevent the formation of limescale.
After each use clean, in addition to the walls, the shower tray it can be cleaned using simple neutral soap.
Absolutely avoid any aggressive detergents such as acids, bleach and alcohol which would end up doing serious damage to the surface.
Use a brush on the staves without problems as the resistance of the stone is such as not to damage the material.
Clean an acrylic shower tray
L’acrylic is not among the strongest materials, therefore, the utmost attention must be paid to cleaning, in order not to damage the shower tray.
Much better therefore to stick to a daily cleaning, using hot water so that limescale has difficulty forming.
At the most, for emergencies, use a mildly aggressive detergent to avoid damage.
The products to avoid when cleaning a shower tray
Established that i too aggressive products are dangerous and harmful for the correct maintenance of the shower cubicle and tray, it is also useful to list the other products to avoid when you want to clean:
- greasy or wax-based detergents that can make the shower tray slippery,
- sodium hydroxide,
- acetone and solvents of various kinds.
How to clean the shower quickly and easily. The rules for the correct maintenance of the shower enclosure, tiles, joints and shower head. How to remove mold and limescale with natural products and remedies and which products to avoid.
Often a tiring and difficult issue to deal with that of housecleaning.
It is not difficult to find excuses to give up and postpone housework, but some circles, especially the bathroom, they need cleaning and disinfection with daily frequency.
One of the elements that we like so much to use for our daily cleaning, also needs careful maintenance: the shower.
To clean the shower becomes basic because in this way we will not go to ruin the shower cubicle and for keep away limescale and bacteria that could attack it and deteriorate it little by little.
How to clean the shower: remove limescale
There most harmful substance and more here I’m in shower cabin is without a doubt the limestone that is formed following the continuous water jets that break on the walls.
Also read: 50 cool shower stall ideas
Keeping it away as much as possible, eliminating once it has formed, will be the best possible response to these annoying attacks.
In particular, the most annoying is the limestone that forms on the glass walls, causing it to lose its original transparency.
Natural remedy
The natural remedy provides a composition that is obtained by combining:
- White vinegar
- bicarbonate
- lemon.
Then proceed as follows:
- Put the solutions in a special container with a spray,
- Spray on the surface and leave for a few minutes,
- Then rub carefully, using a cloth that is not excessively abrasive so as not to damage the material of the walls.
- Rinse and the shower box will shine again.
How to prevent limescale build-up
To avoid excessive accumulation of limescale, at the end of each shower it is recommended to dry the walls with a cloth or using a window cleaner brush that will perfectly remove every single drop.
How to clean the shower from mold
There mold it is one of the most dangerous elements for the good preservation of the shower, as well as being a health hazard.
Natural remedy
You may be interested in: Clean floor joints with ease
The steps to follow to get rid of mold are as follows:
- Prepare a solution with half a liter of water, a quarter of a liter of vinegar and a glass of lemon,
- If the mold is excessive, add some bicarbonate,
- Pass a stiff bristle toothbrush between the tile joints and where necessary,
- Rinse,
- Wipe dry with a dry cloth.
How to clean the shower head
The shower head is the fundamental point: the limestone excessive can lead tototal occlusion of the pinholes, making it difficult to wash and forcing you to change the shower head directly.
How to clean a detachable shower head
Do you want design advice on how to furnish? Join the group
If it is possible to disassemble it, create a solution of warm water and white vinegar by immersing the shower head in a bain-marie.
The longer it stays, the more effective the product will be.
How to clean a non-removable shower head
If it is not possible to disassemble it, then it will be remedied using a stratagem.
- Fill a bag with cold water and vinegar in equal portions,
- Tie it to the shower head and leave it for a couple of hours,
- Remove the bag and open the shower tap,
- Drop the limescale
- If this is not enough, gently scrape the shower head with a toothbrush,
- Additional elements can be removed with a needle, being careful not to damage the parts of the shower head.
How to clean shower tiles and grout
The shower tiles they must be sanitized often as due to the vapors it easily incurs the formation and proliferation of bacteria.
In particular, the problem mainly focuses on the joints, on which dirt accumulates, as well as soap and foam residues.
Clean the shower joints
For clean the joints from dirt and return them to their original color, just use an old toothbrush, and apply a solution of bicarbonate and hydrogen peroxide, rubbing vigorously.
Wait a few minutes before rinsing with warm water.
Clean the shower tiles
To clean the tiles, just use water and vinegar, not just for remove limescale, but also to sanitize.
While the mold stains they must be removed from the tiles with hydrogen peroxide, leaving it to act for a few hours before rinsing.
How to clean the shower curtain
If you have one curtain instead of the plastic or glass box, it must be cleaned and washed as if it were a garment, then remove the curtain from its support.
There will be two alternatives.
Machine wash the shower curtain
Place the curtain in the washing machine, carefully following the instructions on the product label.
It is advisable to do a washing identical to that for delicate garments, adding a couple of teaspoons of baking soda.
Use the trick of inserting a few towels, so that too stiff folds can damage the curtain in the corners.
Hand wash the shower curtain
If you don’t have a washing machine or you prefer the traditional method, equip yourself with a large basin.
- Fill the basin with warm water,
- Dissolve a couple of tablespoons of coarse salt,
- Immerse the tent in the basin, placing weights on it so that it does not float,
- Leave to soak for at least 2 hours,
- If there are stains left, wipe a non-abrasive sponge with baking soda,
- Allow to dry by hanging the tent in a ventilated but not exposed to the sun to avoid discoloration.
Remove mold stains from the shower curtain
If the situation is limited to having to remove some mold stains from the curtain, you can also operate without having to remove the curtain, using a natural remedy.
- Rub a slice of lemon on the parts where mold occurs,
- Leave on for at least an hour,
- Rinse thoroughly.
How to clean the marble shower
If you have chosen to make the marble walls, decidedly luxurious solution, it is necessary to use some precautions.
First of all, provide yourself with water, baking soda and some cloths.
- Remove the surface dirt from the shower with a rag,
- Prepare a solution with water and two teaspoons of baking soda,
- Put the solution in a spray bottle,
- Spray the product about 20 cm from the walls,
- Leave on for a couple of minutes,
- Rinse with a non-abrasive sponge.
If you want one more thorough cleaning of the interstices between one tile and the other, but not to be done too often so as not to damage the marble, you can use an old toothbrush with a few drops of bleach.
By passing through the affected areas, without touching the rest of the surface, even the most stubborn dirt can be perfectly removed.
How to clean the shower tray
The shower tray can be made of different materials, each of which requires special treatment.
Cleaning a stone shower tray
For a shower tray in natural stone, no special precautions are required, other than to clean and keep the shower walls in good condition regularly, in order to prevent the formation of limescale.
After each use clean, in addition to the walls, the shower tray it can be cleaned using simple neutral soap.
Absolutely avoid any aggressive detergents such as acids, bleach and alcohol which would end up doing serious damage to the surface.
Use a brush on the staves without problems as the resistance of the stone is such as not to damage the material.
Clean an acrylic shower tray
L’acrylic is not among the strongest materials, therefore, the utmost attention must be paid to cleaning, in order not to damage the shower tray.
Much better therefore to stick to a daily cleaning, using hot water so that limescale has difficulty forming.
At the most, for emergencies, use a mildly aggressive detergent to avoid damage.
The products to avoid when cleaning a shower tray
Established that i too aggressive products are dangerous and harmful for the correct maintenance of the shower cubicle and tray, it is also useful to list the other products to avoid when you want to clean:
- greasy or wax-based detergents that can make the shower tray slippery,
- sodium hydroxide,
- acetone and solvents of various kinds.
