Standard concrete paving also tends to be more affordable than exposed aggregate paving, costing only about $7-9 per square foot..
Table of Contents
How long does Exposed aggregate last?
But how long will exposed aggregate last? With the right care, you’re looking at over 10 to 20 years of life. One of the most attractive benefits of using exposed aggregate is its longevity. At Concept Concrete, we offer up to a 78-month warranty on your exposed concrete driveways, patios, and more.
Is Exposed aggregate concrete worth it?
Exposed aggregate is mostly recommended for families. Because it is slip resistant, you can use it as the surface for your pool deck, patio, and sidewalk. It is also a great choice for those who plan to improve the look of their driveway because of its resilience to heavy items.
Why is exposed aggregate so expensive?
Exposed aggregate concrete costs as much as double what you’d pay for normal class concrete. This is because there is an additional material cost for the aggregate used and more labour involved in creating the finish.
Is Exposed aggregate cheaper than stamped concrete?
Regular concrete will provide a lower cost to install, as it will be your traditional grey slab. Adding the element of design through use of exposed aggregate will add a bit to the overall cost, and may save a little bit of money in comparison to a stamped surface.
Is it cheaper to pour concrete or lay pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
What lasts longer concrete or pavers?
concrete driveway, concrete is the more durable of the two.) Pavers are also easier and cheaper to repair and replace than concrete. If an individual brick or stone is loose or damaged, you can easily replace it without affecting the rest of the bunch.
What is cheaper laying pavers or concrete?
On average, According to Home Advisor, concrete costs about $6-$10 per square foot, while paving stones have a cost of approximately $10-$20 per square foot. But not always what is cheap has superior quality. In fact, in most cases, it’s the other way around.
What is the cost of exposed concrete? The price ranges depending on size of job, location, access, amount of work required. For a 800 square foot minimum removal and replacement for driveway or patio: – Broom finish concrete pricing ranges from $16.00 – 19.00/square foot. – Exposed aggregate concrete pricing ranges from $19.00 – 22.00/ square foot.
Is Exposed aggregate concrete more durable?
Both standard and exposed aggregate concrete driveways are highly durable, but many installers recommend sealing the surface to ensure longevity. Aggregate driveways are especially susceptible to weathering and deterioration due to their textured surfaces.
Is Exposed aggregate cheaper than pavers?
Make sure you do your research into costs before deciding. Standard brick pavers cost about $29.00 per square metre. Our exposed aggregate driveway pavers start from $49.95 per square metre. Some exposed aggregate poured concrete average around $100 to $150m2 for a decorative stencilled concrete driveway.
Is Pebblecrete the same as exposed aggregate?
Pebblecrete is concrete that incorporates small pebbles to change its appearance and texture. It’s also known as exposed aggregate.
Is exposed concrete cheaper?
Exposed aggregate concrete is cheaper than its decorative counterpart. While the latter is not quite pricy, using concrete would be cost-efficient for larger spaces. The cost of decorative concrete is approximately $12o while exposed aggregate concrete costs roughly $100.
How do you get exposed aggregate finish on concrete?
An exposed-aggregate surface is obtained by placing concrete and then removing the outer ‘skin’ of cement paste to uncover decorative coarse aggregate (either batched into the concrete mix or seeded onto the surface).
Which is cheaper stamped concrete or pavers? In terms of upfront cost, poured and stamped concrete tends to be the cheaper option. Concrete is fairly inexpensive, and you can cover a large plot of the land fairly quickly. Pavers are more expensive since each tile needs to be purchased individually. You will also pay more in labor costs for installation.
Can you shovel exposed aggregate? The use of a “PLASTIC SHOVEL” for snow removal is highly recommended. This will eliminate scratching and the loss of stones to the stamped or exposed aggregate.
Is Exposed aggregate stronger? Tough and long lasting, exposed aggregate is one of the strongest concrete mixes available on the market. The lower water to concrete ratio means that exposed aggregate has a much stronger surface than brushed concrete, which requires more water to achieve a smoother finish.
How thick should exposed aggregate be?
A minimum thickness of 70 to 75 mm is recommended to allow sufficient cover for reinforcement and minimise curling problems. This also permits the use of 20-mm aggregates or larger.
Is Exposed aggregate slippery in the winter?
Be careful of exposed aggregate as it is crazy slippery in rain and Icy conditions although it looks great, I had a large side walk done and I it also tends to chip away.
Is sealed exposed aggregate slippery?
Sealed surface may be slippery when wet. For additional slip resistance, use Glaze ‘N Seal Grip ‘N Seal additive. Product coverage will be 100 – 400 square feet per gallon for the first coat depending on surface porosity.
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway’s sub-base is sound. Some people dislike the noise gravel makes and the fact that some of the stones end up in the road.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Is Exposed aggregate hard to walk?
Exposed aggregate is extremely attractive with unique designs. It is popular in residential properties but also in spaces that receive a continuous influx of people. It is non-slippery, making it safe for those walking around, whether young or old.
What type of concrete is used for exposed aggregate?
Matt Villers of CSI recommends recycled crushed concrete as a base for exposed aggregate walkways. “When you hose it and wack it, it’s almost like you’re walking on pavement,” says Villers. Translation: When properly applied with water and compacted, recycled concrete makes a very stable sub-base for concrete walkways.
How do you seal exposed aggregate?
How often do you seal exposed aggregate?
Depending on weather and traffic, when using an acrylic sealer exposed aggregate concrete should be sealed every 12 to 36 months.
How do you maintain Exposed aggregate concrete? When it comes to maintaining exposed aggregate, regular cleaning is of utmost importance. Ideally, you want to sweep your patio or driveway at least once a day to keep it free from dust, dirt, or debris. (You can also use a leaf blower to speed up the process).
What do you seal exposed aggregate with? Sealing Exposed Aggregate
Apply a Solvent Based Acrylic Sealer. These sealer types can be used on exposed aggregate with excellent results. Using a 1/2″ roller, start applying the sealer at the far end making sure to not step in the sealer.
