**For a 1,600-2,000 sq. ft. house, a 2.5 ton central AC system costs $3,900-5,000..**

Table of Contents

## What size air conditioner do I need for a 3000 square-foot house?

Since larger homes are costlier to cool, you’ll need a 5-ton unit to cool a 3,000 square-foot home.

### What size AC do I need for 1500 square feet?

Therefore, if your home is 1,500 square feet, your air conditioning unit should be 3.5 to four tons.

### What size AC unit do I need for a 2500 sq ft house?

Step 5: Match your square footage to an HVAC size chart

Home Sq Footage | Air Conditioner Size (tons) |
---|---|

600 – 1,000 square feet | 1.5 tons |

1,000 – 1,500 square feet | 2 tons |

1,500 – 2,000 square feet | 3 tons |

2,000 – 2,500 square feet | 4 tons |

### What size house will a 3.5 ton AC unit cool?

ZONE 1 | ZONE 2 | |
---|---|---|

3 Tons | 1501 – 1800 sf | 1501 – 1850 sf |

3.5 Tons | 1801 – 2100 sf | 1851 – 2150 sf |

4 Tons | 2101 – 2400 sf | 2151 – 2500 sf |

5 Tons | 2401 – 3000 sf | 2501 – 3100 sf |

## What ton AC do I need for 2000 square feet?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you’ll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you’ll get 60,000 BTUs.

### What SEER rating should I buy?

For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.

### What size AC do I need for a 2000 square foot home?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you’ll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you’ll get 60,000 BTUs.

Can I replace a 3 ton AC with a 4 ton? Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn’t that much less than full capacity because of the unloading scroll systems.

## What size AC do I need for 2000 square feet?

If your home is 2000 square feet, you can calculate your HVAC needs the same as you would for a 1600 square foot home. Assuming one ton of cooling capacity can cool 400 square feet of your home, you’ll need about 5.0 tons of air conditioning capacity. Multiply this by 12,000 BTUs, and you’ll get 60,000 BTUs.

### How many sq ft will a 3.5 ton AC cool?

Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet. A four-ton unit is suitable for homes that are more than 2,100 square feet up to 2,400 SF.

### How many sq ft will a 3 ton AC cool?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

### Is 13 SEER considered high efficiency?

The minimum SEER rating is 13, with a rating above 16 considered high efficiency. You should consider a high efficiency system for the following reasons: Lower Utility Bills – High efficiency systems with higher SEER ratings use less energy, which translates to less money you spend on energy bills.

### How big of an AC unit do I need for a 2500 square foot house?

Step 5: Match your square footage to an HVAC size chart

Home Sq Footage | Air Conditioner Size (tons) |
---|---|

600 – 1,000 square feet | 1.5 tons |

1,000 – 1,500 square feet | 2 tons |

1,500 – 2,000 square feet | 3 tons |

2,000 – 2,500 square feet | 4 tons |

Can an AC unit be too big? Too Hot or Too Cold Air

An oversized HVAC unit can make your home’s inside temperature uncomfortable. An HVAC system with excess capacity can heat or cool your home faster, but that speed often results in a couple of other issues. First, your home won’t benefit from gradual, even heating and cooling.

### Which is better Trane or Carrier?

All the models belonging to the three tiers produced by Trane are more energy-efficient than that in Carrier. Thus, if energy efficiency is your prime consideration, it is advisable to buy any of the Trane ACs over Carrier. Some of the AC units of Trane offer between 30 and 40 percent of energy savings respectively.

Does a higher SEER cool better? It’s calculated by dividing the cooling output for a system by the energy used to create it. Most industry experts compare a SEER rating to a car’s fuel efficiency. The higher the SEER, the more efficient the cooling system should be. Similarly, cars with higher miles-per-gallon ratios go further with less fuel.

## How much should a 3 ton AC unit cost installed?

A 3-ton AC unit cost runs homeowner around $3,400 to $3,700. When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700.

### What size AC unit do I need for a 1800 sq ft house?

Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.

### Why is HVAC installation so expensive?

Conclusion. When it comes down to it, the most expensive parts of any HVAC unit installation will be the machine and the labor. The device is so expensive because it is filled with complicated electrical gadgets that measure airflow and temperature.

### How many square feet will a 3 ton air conditioner cool?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

## What size house will a 3 ton AC unit cool?

And manufacturers do provide estimates, which helps homeowners narrow down their choices. For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.

### How many square feet will a 3-ton AC cool?

How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

### How many sq ft will a 2.5 ton AC cool?

For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.

How many square feet can a 3-ton AC unit cool? How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

## Is 21 SEER worth the money?

Even when you factor in energy rebates, you still don’t recoup the cost. So, between a 16 SEER and 21 SEER unit, it’s not really worth it in the long run to go with the higher SEER (if we’re just looking at cost).