Installing shoe molding typically costs around $0.50 per linear foot..
Table of Contents
How much should I charge to install base molding?
The labor cost to install baseboards is $4.90 to $7.75 per linear foot. Baseboard materials are pretty inexpensive (only about $0.80 to $1.20 per linear foot). Labor makes up most of your price.
How much does it cost to install baseboard and shoe molding?
$7.75 Per Foot Installed
The average cost of a floor and baseboard molding job done by a contractor is between $5.75 to $9.00 per linear foot. On average, materials cost between $1.35-$4.50 per linear foot, but premium hardwood can cost more. The overall cost for a 20×20 room is between $450-$700 for pro installation.
How much should I charge for trim?
Indoor Trim & Molding Cost Calculator
National Average | $1,312 |
---|---|
Typical Range | $607 – $2,062 |
Low End – High End | $200 – $6,000 |
How much does it cost per linear foot to install baseboard?
Plan to pay between 80 cents and $1.20 per linear foot for basic solid wood baseboards. If you go for MDF baseboards, the cost ranges from 60 cents to $1 per linear foot. This price does not include the labor to install the trim.
How many linear feet are in a square foot?
Linear Foot vs Square Foot:
How many linear feet in a square foot? It may be one of the questions you want to be answered. While a linear foot is a one-dimensional measurement, a square foot is a two-dimensional measurement. A square foot is the result of two linear measurements.
How much should I charge to install crown molding?
To have a professional install crown molding, expect to pay between $4 and $15 per linear foot for materials and labor. A single room costs anywhere from $300 to $800, while a whole house installation costs between $3,200 and $12,000.
Do you caulk shoe molding?
Should there be a gap between shoe molding and floor? Usually 3/8- 1/2 inch around the floor perimeter. The size of the gap is such that standard floor molding can span this gap so it is not seen. It’s always a good idea to keep this gap open and clear.
HOW MUCH DOES quarter round molding cost to install?
$4.90 Per Foot Installed
The cost to have quarter round trim professionally installed is about $4.90 per linear foot, or around $390 for a 20 x 20 room. The most commonly used trim costs $0.70- $2.65 per linear foot, but DIY price for the project might be higher than that if you need to purchase tools and fasteners.
How do I estimate baseboards?
For instance, to calculate the linear foot measurement to replace baseboards in your room, measure the length of one wall and the width of the other. Then multiply each measurement by two and add all four numbers together.
How much does it cost to install door and trim?
The average cost to install door trim is $150 per door, with low-end installations around $100 and high-end jobs at $250. Installing window trim ranges between $100 to $170 per window, but they can be as low as $40 or as high as $350. Labor is around $70 per hour for both windows and doors.
How do you install shoe molding?
What angle do you stop shoe molding?
Install Outside Corner
For the outside corners of shoe molding, the end of each molding piece coming together will be mitered at opposite 45-degree angles.
How much does molding cost per foot? Solid wood molding typically costs $2 to $4 per linear foot, whereas foam, vinyl, PVC, or MDF usually costs between $1 and $2 per foot. Crown molding comes in several different materials, with some exotic woods reaching as high as $45 per linear foot.
How much labor does it cost to install crown molding? Labor Cost to Install Crown Molding
Most installations run in the $3 to $8 per linear foot range for labor alone, but some professionals report charging as much as $15 per linear foot for plaster and custom installs. You can expect to pay a little more in high priced areas, or for highly experienced professionals.
How do you price crown molding? Here are some of the most common crown molding materials by price per linear foot:
- Polystyrene: $1 to $2.
- Vinyl: $1 to $3.
- MDF: $1 to $3.
- Solid Wood: $1 to $6.
- Polyurethane: $2 to $6.
- Plaster: $6 to $15.
- Exotic Wood: $10 to $40.
How much do you charge per linear foot for trim?
Wood Trim Costs
Item | Unit Cost | Line Cost |
---|---|---|
Wood trim | $4 per linear foot | $2,000 |
Labor (carpenter) | $70 per hour | $1,680 |
Total Cost | $7.36 per linear foot | $3,680 |
How much does it cost to install crown molding per linear foot?
To have a professional install crown molding, expect to pay between $4 and $15 per linear foot for materials and labor. A single room costs anywhere from $300 to $800, while a whole house installation costs between $3,200 and $12,000.
How much does it cost to put trim around a window?
Window Trim Installation Costs
Item | Unit Cost | Line Cost |
---|---|---|
Wood trim | $1-$1.50 per linear foot | $20-$30 |
Labor Cost | $65 per hour | $65 |
Total Cost | $4.25-$4.75 per linear foot | $85-$95 |
What is the labor cost to install kitchen cabinets?
The average installation cost is between $50 and $70 per linear foot. Labor and installation can range from $400 to over $1,000. This cost may increase if the installers are removing your old cabinets as well. You can easily find kitchen cabinets that are finished.
How much does it cost to install a Prehung door?
Cost to Install an Interior Prehung Door
The cost to install a prehung door is between $200 and $400 on average for the labor. This makes a total cost range of $270 to $2,400. For a prehung door, installation is fairly quick and easy. The door frame and jamb are trimmed to fit the opening.
How much does it cost to install interior doors?
The average cost to install an interior door is $226 to $824. Bathroom or bedroom door replacement costs $155 to $688, and sliding closets, French, or double doors range from $383 to $1,711 on average. Door prices alone are $50 to $500, and labor costs to hang a door are $100 to $300.
How do I estimate shoe molding?
Divide the total number of inches by 12 to convert from inches to linear feet. For example, if your wall measured 40 inches in length, and you are installing molding on the top and bottom, 40 x 2 = 80 inches. Divide 80 by 12 to get 6.66 linear feet.
How many linear feet is 100 square feet? Determine Linear Feet for Flooring
This is done by multiplying the total square footage by 12. So for a room of 100 square feet where a 5-inch wide floorboard is being used, the number of linear feet needed would be (100 x 12) / 5 or 240 linear feet.
How much does a window sill cost?
The average cost for a simple window sill replacement is between $240 and $524 for both parts and labor. The sill is the ledge that peaks out at the bottom of your window. You should replace this part anytime it feels loose, has rotted, or has broken edges.
How much does it cost to install a door slab? The cost to install a slab door is $50 to $400 on average. The cost of installing a prehung door varies greatly by size: Standard (up to 80-by-36 inches): $150–$700 installed. Extra-large (exceeds standard sizing): $220–$1,450 installed.
Does window installation include trim? A full-frame window installation includes removing and replacing the interior and exterior trim.